Residential
Generac and generator installation in Orleans and Ottawa
Standby generator installation and connection, including Generac units, by a licensed and insured Master Electrician. Power for the circuits you need when the grid is down.
- Master Electrician
- ESA compliant
- Licensed and insured
- BBB Accredited, A+ rated
Overview
Standby power, wired in
A standby generator is installed permanently and connected to your panel through an automatic transfer switch, so selected circuits can run when the utility is off. A Generac Guardian set is that kind of unit, fuelled by natural gas or propane. If you already own a portable generator, see Generlink installation in Orleans and Ottawa instead. A generator can mean panel work too, so see panel upgrades in Orleans and Ottawa. Request a quote and tell us what you want running in an outage.

What is included
What a generator installation covers
- 01
Standby generators
A permanent outdoor unit on natural gas or propane, with an automatic transfer switch. Generac's Guardian air-cooled series is published at 10, 14 and 18 kilowatts, with larger sets above that. Have a unit already, or still choosing? Tell us the make on the form.
- 02
Transfer switch
The automatic transfer switch moves the selected circuits to the generator and keeps them off the utility lines. Hardwiring a generator to a transfer switch is filed with the ESA. A meter-collar Generlink is a different device, and that collar is not filed the same way.
- 03
Sizing
A load calculation sets the size from the circuits you want running, from a set of essential loads to the whole calculated load of the house.
- 04
Gas and pad
The gas line and the concrete pad are another trade. The electrical work is the transfer switch, the conductors and the connection to the panel.
Before you book
Good to know
- Whole home or essentials
- Decide whether you want the whole calculated load on the generator or a set of essential circuits. That choice sets the size.
- After installation
- A fault in the electrical connection is electrical work. Engine maintenance is separate.
Questions
Generac and generator installation questions
Do you install Generac generators?
A Generac Guardian standby generator is a permanent natural-gas or propane unit with an automatic transfer switch. Have a model already, or still choosing? Tell us on the form. The electrical work is the transfer switch and the connection. The gas line and the pad are another trade.
Standby generator or Generlink?
A standby generator is permanent, starts on its own through an automatic transfer switch, and the hardwired installation is filed with the ESA. A Generlink connects a portable generator you start yourself, at 30 amps (7,200 watts) or 40 amps (9,600 watts), and that meter collar is not filed when a Licensed Electrical Contractor installs it under the utility's rules.
How big a generator do I need?
The load calculation sets it. Essential circuits are a smaller total than the whole house. Generac publishes Guardian air-cooled sets at 10, 14 and 18 kilowatts, and larger sets such as 26 kilowatts on liquid propane (22.5 kilowatts on natural gas) with a 200 amp transfer switch. Tell us what you want running.
Do you handle the gas line and pad?
No. The gas line and the concrete pad are another trade. The electrical work is the transfer switch, the conductors and the connection.
Do you repair generators?
Yes, on the electrical side. A fault in the connection or the transfer switch is electrical work. Engine service and maintenance are separate. Tell us what is wrong on the form.
How it works
From sizing to standby
- 01
Request
Tell us what you want running in an outage.
- 02
Sizing
A load calculation sets the generator size, then we quote.
- 03
Install
The generator and transfer switch are installed and connected.
- 04
ESA
The notification is filed with the Electrical Safety Authority before the work starts.
Request a quote
Plan your standby generator
Tell us what you want running in an outage, and whether you have a gas supply.
