Residential

Generlink installation in Orleans and Ottawa

Generlink installation by a licensed and insured Master Electrician. Connect a portable generator to your home at the meter, without extension cords through the house.

  • Master Electrician
  • ESA compliant
  • Licensed and insured
  • BBB Accredited, A+ rated

Overview

Your portable generator, connected properly

A Generlink is a meter-socket transfer switch. It sits behind the revenue meter and connects a portable generator with a break-before-make transfer, so the generator is not paralleled with the utility. The MA23 is the 30 amp model, 7,200 watts continuous. The MA24 is the 40 amp model, 9,600 watts continuous. Both are for a 120/240 volt service of 200 amps or less. If you would rather have a permanently installed unit that starts on its own, see Generac and generator installation in Orleans and Ottawa. An older or full panel may need work first, so see panel upgrades in Ottawa. Request a quote with your generator's make and model.

Vincent Bourdeau standing beside his work van on a residential street
Vincent Bourdeau with the work van

What is included

What a Generlink installation covers

  1. 01

    Meter connection

    The device goes behind the meter. Hydro Ottawa disconnects the service before anyone opens the meter socket, and the collar has to meet specification GCS0008. Hydro One, since 1 October 2025, wants an ESA connection authorization before the meter goes back in.

  2. 02

    Load planning

    You choose which breakers to run, inside the 7,200 watts of an MA23 or the 9,600 watts of an MA24, and inside what the generator itself can carry.

  3. 03

    Equipment

    Have a Generlink and a generator already, or still choosing? Tell us the models on the form. The generator cord is the manufacturer's GenerLok cord.

Before you book

Good to know

Your generator
Have the make, model and running watts ready. An MA23 is for up to 7,200 watts continuous. An MA24 is for up to 9,600 watts continuous.
Safety
Run a portable generator outdoors only, away from windows, doors and vents. It must not be able to backfeed the utility.

Questions

Generlink installation questions

What is a Generlink?

A meter-socket transfer switch installed behind the revenue meter. It lets a portable generator feed the panel through a break-before-make transfer, so the generator is not connected to the utility at the same time. The MA23 is 30 amps and 7,200 watts continuous. The MA24 is 40 amps and 9,600 watts continuous. The device has to be approved to SPE-1000 or to UL 1008M, which ESA still accepts while the Canadian edition of that standard is in transition. Its neutral lands on the neutral in the meter base, not on the ground terminal.

Generlink or a standby generator?

A Generlink works with a portable generator you start and fuel yourself, limited to 30 or 40 amps through the meter device. A standby generator is installed permanently, on natural gas or propane, and transfers through an automatic transfer switch. Hardwiring that standby set requires an ESA notification. The Generlink collar itself does not, when a Licensed Electrical Contractor installs it and follows the utility's rules.

Does the utility need to approve it?

Yes, in the sense that the utility controls the meter. Rule 2-005 f) does not require an ESA notification when a Licensed Electrical Contractor installs the collar and follows the supply authority's requirements. Hydro Ottawa still disconnects the service first, and the installation has to meet GCS0008. Hydro One requires an ESA connection authorization before reconnection, including for a licensed contractor, as of 1 October 2025. Tell us which utility is on the bill.

Do you supply the generator?

Have a Generlink and a generator already, or still choosing? Tell us the models on the form.

Who does the work?

Vincent Bourdeau, a licensed and insured Master Electrician. The installation follows the Ontario Electrical Safety Code and the utility's meter rules.

How it works

From request to connection

  1. 01

    Request

    Send your generator details and what you want to run.

  2. 02

    Check

    We look at the meter, the panel and the generator, and at which utility's rules apply.

  3. 03

    Install

    The utility disconnects the meter. The Generlink is installed, and the meter goes back when that utility's authorization is in place.

Request a quote

Connect your generator

Send your generator's make and model and what you want to run in an outage.