Residential
Hot tub, spa and sauna wiring in Orleans and Ottawa
Dedicated circuits and connections for hot tubs and saunas by a licensed and insured Master Electrician. Sized for the equipment and your panel.
- Master Electrician
- ESA compliant
- Licensed and insured
- BBB Accredited, A+ rated
Overview
A circuit sized to the equipment
A permanently installed hot tub or spa is hardwired, with Class A GFCI protection and a disconnect placed to the distances in Section 68. The breaker is the one on the nameplate. If the panel has no room for that load, see panel upgrades in Orleans and Ottawa. Request a quote with the make and model.

What is included
What the wiring covers
- 01
Hot tubs
The circuit is sized to the nameplate. Class A GFCI protection stays at least 3 metres from the water unless it is built into the tub or behind a barrier. The disconnect stays at least 1.5 metres away unless it is behind a barrier. Trenching and the concrete pad are another trade.
- 02
Saunas
Tell us the heater make and model on the form. The circuit is sized to that nameplate.
- 03
Panel check
We confirm your panel can carry the new load before the work is quoted.
Before you book
Good to know
- Equipment
- Have the make, model and nameplate ready. A portable spa under CSA C22.2 No. 218.1 is cord-connected at no more than 115 volts and 15 amps. A permanently installed tub is hardwired.
- Location
- Tell us where it will sit and how far that is from the panel.
- Site work
- Trenching and the concrete pad are another trade. The electrical work is the circuit, the GFCI and the disconnect.
Questions
Hot tub and sauna wiring questions
Does a hot tub need its own circuit?
A permanently installed hot tub is hardwired on a circuit sized to its nameplate, with Class A GFCI protection. The GFCI device is not closer than 3 metres to the water unless it is part of the factory-built tub or behind a barrier. The disconnect is outdoors when the tub is outdoors, and not closer than 1.5 metres unless it is behind a barrier. A portable spa rated 115 volts and 15 amps is cord-connected instead.
Can you wire a sauna?
Tell us the heater make and model on the form. The circuit is sized to that nameplate. The electrical work is the circuit and the connection.
Do you dig the trench or pour the pad?
No. Trenching and the concrete pad are another trade.
Will my panel handle a hot tub or sauna?
A load calculation answers that. The equipment is entered from its nameplate. If the panel has no room, a panel upgrade may come first.
How it works
From request to connection
- 01
Request
Send the make, model and location.
- 02
Panel check
We confirm the panel has room and quote the work.
- 03
Wiring
The circuit is run and the equipment connected.
Request a quote
Wire your hot tub or sauna
Send the make, model and where it will sit.

